Quick Answer: What Level Should Your Kick Drum Be?

What dB should kick be at?

Re: Recommended -dB of bass in relation to kick I would recommend you average your levels around -18db or so and after that, while mixing, set your levels in relation to each other rather than the meter per se..

Why are my 808s so quiet?

It could be an issue of headroom. If you have anything else playing at the same time (especially recorded tracks) and you have not EQed out the low frequencies on those tracks then they fight for space and your 808 gets squished.

Why is an 808 called an 808?

If you’re into hip-hop and pop, you’ve probably heard “808” at some point. That’s a reference to the iconic Roland TR-808, a drum machine created by Ikutaro Kakehashi in 1980. … The machine particularly stood out for its powerful bass drum sound.

What is a fast attack on compression?

With a fast attack speed, the compressor kicks in almost immediately, which is great if you’re trying to prevent signals from clipping or tame unruly peaks. As for tone, fast attack times can be used to tighten up sloppy performances and make things feel a little more polished.

How loud should my vocals be in a mix?

If you mix them too loudly, they will stick out. What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB.

What Hz is a kick drum?

about 40 to 100 HzWhile the fundamental of the kick drum lies between about 40 to 100 Hz, these are, fortunately, not the critical elements of the electric bass spectra. Instead, it is the overtones in the fifth and sixth octaves (300 to 1200 Hertz) that are especially important in defining the pitch character of the bass.

How do you get a punchy kick drum?

How To Get A Punchy Kick On Every MixChoose the right kick sample. If you are having trouble making the kick come through in the mix, make sure you’ve chosen the right kick sample. … Use EQ to fatten/tighten up the kick. … Use Compression to make the kick punchy. … Make Sure Your Kick Sample Is In Mono. … Use Sidechain Compression To Give Space To Your Kick.

How much compression should a drum have?

Compression can be tricky, but it’s one of the keys to achieving a modern drum sound. It’s common to apply between 3-6 dB of gain reduction to the kick and snare.

WHAT IS 808s Sidechaining?

Sidechaining involves using a compressor that temporarily reduces the volume of a sound. Achieve this technique by loading a compressor on the 808 track. Then, choose the kick or another percussive sound as the external trigger source. Next, adjust the attack and release controls to balance the mix.

How loud should drums be?

Drums. Start by setting the snare fader at 0 dB and bringing the rest of the drum mix in around it. … Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.

Should you compress kick drum?

Kick Drum Compression is Essential In the context of a solo drum performance, you won’t HEAR any need for a compressor. This is why we need to focus on the bigger picture, not on any particular track. Either way, let’s listen to our entire kit to get some context…

How do you EQ a kick drum?

Kick Drum EQ50 – 100 Hz – Boost to add low-end punch. … 150 – 250 Hz – If you’re worried about boosting the low-end too much because you think the kick drum is already pretty thick, try cutting in this area. … 300 – 600 Hz – Here you find the infamous cardboard sound.More items…

How loud should my track be?

Your music will get turned down if it’s louder than -14 LUFS. Going for a more dynamic and punchy mix will sound better than an over-compressed, distorted master. … You wouldn’t want your song to lack energy compared to the other tracks, so try to keep the overall integrated LUFS value at -16 LUFS or louder.

How loud should a mix be before mastering?

I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB. This will allow the mastering engineer the opportunity to process your song, without having to resort to turning it down.

Should Kick be louder than 808?

Just make it loud in the context of the mix. Especially in hip hop, kick drums like the 808 tend to be the loudest instrument in a mix. Instead of dressing up an 808 with half-a-dozen signal processors, just try making it louder than the other instruments. Start with all your faders down.

Should I put a limiter on every track?

As a general rule, you use compressors on individual instruments and busses. If your vocal track is too dynamic, you wouldn’t want to put a limiter on it. The strong ratio of a limiter would squash your vocal too much, making it sound unnatural.

How do you equalize a kick drum?

One great EQ trick to try if your kick isn’t cutting through the mix is to boost the upper mids. You can be a little aggressive with it to help you find the right frequency to boost. Find the frequency that gives you the shape/tone you’re looking for. Then adjust the gain to a level that sounds good to your ears.

What is an 808 kick?

The Roland TR-808 Rhythm Composer, commonly known as the 808, is a drum machine manufactured by the Roland Corporation between 1980 and 1983. … Launched when electronic music had yet to become mainstream, the 808 received mixed reviews for its unrealistic drum sounds and was a commercial failure.