- Does the 6.2 Require premium fuel?
- How good is the Chevy 6.2 engine?
- How fast is a 6.2 engine?
- Is a 6.2 A big block?
- Is 5.3 or 6.2 engine better?
- What cars have ls2 engines?
- What did 6.2 LS come in?
- Which LS engine is best?
- Is the LS engine a big block?
- Are 5.3 and 6.0 cranks the same?
- Is the 6.2 liter engine reliable?
- How much HP can a 6.2 handle?
- How can you tell a 6.2 LS?
- What size is a 6.2 engine?
- What is the best LS Motor to build?
Does the 6.2 Require premium fuel?
GM recommends using 93 octane gasoline for its top-of-the-line 6.2-liter V-8-equipped trucks.
The owner’s manual does state as low as 87 octane is acceptable for the engine.
However, to achieve maximum performance and fuel economy you must use 93..
How good is the Chevy 6.2 engine?
The 6.2L V8 with Dynamic Fuel Management Named One of 10 Best Engines. … The EPA rated the 6.2-liter V8 with DFM up to 20 MPG on the highway. Available on the Chevrolet Silverado 1500 and GMC Sierra 1500, the 6.2-liter V8 with DFM offers 420 horsepower with 460 pound-feet of torque.
How fast is a 6.2 engine?
Under the hood is a 6.2-liter V8 with a rating of 420 hp and 460 lb-ft of torque. This engine is also mated to a 10-speed automatic transmission. Here are the results. We clocked our new Trail Boss 0-60 MPH at 9.46 seconds at a mile above sea level with three people in the truck.
Is a 6.2 A big block?
In the 6.2, that translates into a 4.02-inch bore. We’ve come to think of the 6.2-liter as a big-block modular. Of course, the only modular architecture making it through to the 6.2 is the bellhousing bolt pattern.
Is 5.3 or 6.2 engine better?
The 6.2 is hands down a more fun motor and will tow significantly better than any of the 5.3 motors, but the 5.3 is no slouch.
What cars have ls2 engines?
Vehicles Using the LS2 EngineChevrolet C6 Corvette (2005-2007)Chevrolet SSR (2005-2006)Chevrolet Trailblazer SS (2006-2009)Cadillac CTS-V (2006-2007)Pontiac GTO (2005-2006)Saab 9-7X (2008-2009)
What did 6.2 LS come in?
The 6.2L V8 Vortec L94 was an engine produced by General Motors for use in luxury SUVs, namely the 2006-2014 GMT900-based Cadillac Escalade/Escalade ESV and GMC Yukon Denali/Yukon XL Denali.
Which LS engine is best?
If you’re planning on boosting your project the 4.8L truck engine will be perfect for you. The 4.8L can take insane amounts of boost completely stock and will really perform well. If you don’t want a barebones 5.3L or 4.8L you could always step up to a 6.2L truck block which is based on the LS3 engine.
Is the LS engine a big block?
The LS6 454 big-block has been something special in the muscle car world and was considered the top dog of muscle car factory engines for a long time. Until the LS series hit its stride in the 2000s, big block Chevy engines were still the go-to platform for large displacement and high horsepower.
Are 5.3 and 6.0 cranks the same?
due to stroke differences and each had different casting numbers. … The 6.0L crank has the same stroke (92mm) as the 5.3L and 5.7L cranks.
Is the 6.2 liter engine reliable?
Chevy EcoTec3 6.2L Reliability Lifter failure is extremely prevalent on these vehicles, despite engine age, and the transmission issues have also proven to be extremely common as well.
How much HP can a 6.2 handle?
4, 6.2L truck engines are closely related to the LS3 used in Corvettes and Camaros. Basically stock engines can make 650 hp. under boost. With upgraded internals, they can handle over 1,000 hp.
How can you tell a 6.2 LS?
How to Identify an LS EngineThe 8th digit of the VIN.By visual inspection. The easiest way to tell the difference is to check the 8th digit of the Vehicle Identification Number (VIN) on the original vehicle. (See below.) If you don’t have the VIN, you can still identify the engine by visual inspection if you know what to look for.
What size is a 6.2 engine?
The 6.2 L V8 has a bore diameter and stroke of 4.015 in × 3.74 in (102.0 mm × 95.0 mm). It has lightweight aluminum cylinder heads and pistons, but makes use of a cast-iron cylinder block for extra durability since most applications for the engine will be trucks.
What is the best LS Motor to build?
The LS3 is the go-to choice for LS engine swappers right now and for good reason; this mill makes great power and is about as reliable as they come. … The CT525 and LS376/515 does away with the standard fuel-injection intake manifold in favor of a carbureted setup.With its iron block, the LSX376-B8 is built for boost.More items…•