- What are 3 amp fuses used for?
- Can I put a 10amp fuse in a 5 amp?
- Can you use 13a fuse instead 3a?
- How many watts can a 5 amp fuse take?
- Can I use a 3 amp fuse instead of a 2 amp?
- What’s the difference between 3 amp and 13 amp fuse?
- Can I replace a 10amp fuse with a 13 amp fuse?
- What appliances need a 5 fuse?
- How much current can a 13 amp fuse take?
- Can you replace a fuse with a lower amp?
- What are 5 amp fuses used for?
- What happens if you use the wrong amp fuse?
What are 3 amp fuses used for?
Different types of fuses Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red).
For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron..
Can I put a 10amp fuse in a 5 amp?
Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.
Can you use 13a fuse instead 3a?
For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.
How many watts can a 5 amp fuse take?
1150 WattsIf your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts.
Can I use a 3 amp fuse instead of a 2 amp?
Yup. The fuse is there to protect the wiring and 3 amp is well within the supply wire’s capability. Re: Radio calls for a 2.5 amp fuse.
What’s the difference between 3 amp and 13 amp fuse?
There are two main types of plug fuse: the 3A fuse and the 13A fuse. In simple terms, a 3A fuse should be used for appliances rated at 700W or less, and a 13A fuse for appliances rated over 700W. … A 5A fuse is safe for appliances rated less than 1,200W. If an appliance using a 13A fuse is found, extra caution is needed.
Can I replace a 10amp fuse with a 13 amp fuse?
If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.
What appliances need a 5 fuse?
Table lamp – 3 amp. Toaster – 5 amp. TV – 3 amp. Vacuum cleaner – 3 amp.
How much current can a 13 amp fuse take?
BS 1362 Fuse Operation Characteristics In fact a 13A fuse will allow a current of 20A to pass indefinitely without blowing.
Can you replace a fuse with a lower amp?
Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.
What are 5 amp fuses used for?
Some circuits in older houses might contain Fuse Wire instead of Fuses. If this is the case in your house, you should use 5 amp wire for a lighting circuit, 15 amp for an immersion heater circuit, 30 amp wire for a ring main or cooker circuit (for cookers up to 12 kw).
What happens if you use the wrong amp fuse?
Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.