Is Multiband Compression Necessary?

What does multiband compression do?

Multiband compression divides the frequency spectrum into different sections, or bands, so that each has its own unique compression settings.

This allows a longer attack time for the low band of that bass drum to punch through, while keeping a shorter attack time in a higher band to keep the guitar in check..

How do you do multiband compression on vocals?

Once you know the range, remove the EQ and load up a multiband compressor. Bypass all of the multiband ranges until you are only targeting the problematic frequency range. Apply 2-3dB of compression using similar settings to your main compressor, with one important exception—don’t apply any makeup gain.

What is Ott compression?

If you’re not familiar with this name, the multiband compressor in Ableton Live has a preset called OTT (over the top). This style of multiband compression combines upward expansion and downward compression to squash a signal. It does this on three different bands.

Should you record with compression?

So perhaps the best advice is to conservatively apply the best of both worlds: use a little compression while recording — just enough to help limit the most unruly peaks and phrases and to even out the recorded signal — and then add more compression to taste during mixing.

What does an OTT do?

OTT stands for over-the-top, initially named in reference to devices that go “over” a cable box to give the user access to TV content. In OTT channels, content is delivered via an internet connection rather than through a traditional cable/broadcast provider.

Should you EQ or compress first?

Each position, EQ pre (before) or EQ post (after) compression produces a distinctly different sound, a different tonal quality and coloration. As a rule, using EQ in front of your compressor produces a warmer, rounder tone, while using EQ after your compressor produces a cleaner, clearer sound.

What does a dynamic EQ do?

The Dynamic EQ interface allows you to adjust the frequency, gain, and bandwidth of a filter, with additional controls common in compressors like threshold, attack, and release. This combination lets you fine-tune the ballistics of the processing to best suit your audio.

How much compression do you need for mastering?

Most mastering engineers use high thresholds and low ratios (typically 1.25:1 or 1.5:1 – rarely anything more than 2:1) in order to achieve just 1 or 2 dB of gain reduction. The idea is to feel rather than hear any compression being applied.

How do I set mastering limiter?

To set a limiter, first identify the loudest section of a song. This is the part where the limiter will react most drastically. It is best to check for distortion in this area. Once you’ve found the loudest part of the song, insert a limiter of your choice on your master bus and listen to your recording.

What is Ott effect?

OTT refers to Over the Top compression. … OTT is multiband upward and downward compression applied at the same time. Downward Compression: the process of lessening the dynamic range of a sound by reducing the louder signals. In other words: downward compression makes the louder parts of a sound quieter.

When should you use compression?

When to Use Compression in Your Mix (3 Situations)When Transients Are Sticking Out of Your Mix. The most basic use for a compressor involves taming transient material using downwards compression. … When Your Mix Isn’t Transient Enough. In addition to attenuating transients, compression allows you to emphasize transients. … When You Want to Create Space.

How do you use multiband compression?

Load up a multiband compressor on the bass part. Set one of the bands on your compressor to 0-100Hz (or higher). Apply 5dB of gain reduction or more – you can be more aggressive with compression on low end instruments. Now apply the same amount of makeup gain.

What are the best vocal compression settings?

Here are my go-to compression settings for vocals:Ratio: 1.5:1.Attack Time: 15ms (but up to 30ms for more punch)Release Time: 40ms.Threshold: -24dB.Gain Reduction: 2-3dB.Knee: Soft.Makeup Gain: 2dB.

What does xfer Ott do?

Xfer Records OTT is a free re-creation of a popular aggressive multiband upwards/downwards compressor set-up used by many dubstep and electro producers.

What is the difference between dynamic EQ and multiband compressor?

Gain vs. Another difference between the two processors is that dynamic EQ functions using gain, or pure level, while multiband compression functions using ratio-driven compression. These two have different sounds, with gain movement being much more transparent than compression.

How do you do compression on mastering?

Here are some general guidelines if you want to use compression while mastering:Start your ratio at 1.25:1 or 1.5:1. … Set your threshold pretty high so that you’re getting 2 dB of gain reduction at most.Use your ears; if you apply compression and don’t like how it affects your master, don’t hesitate to take it out.More items…•

How much compression should I use on vocals?

A good starting point for a rock vocal would be a 4:1 ratio with a medium-fast attack and a medium release. Then, set the threshold for around 4 to 6dB of gain reduction. Increase or decrease the attack time until you get the right level of forwardness for the mix.

What does multiband mean?

: involving or operating across two or more bands (see band entry 1 sense 5b) and especially wavelength or frequency bands a multiband radio.