Can I Use A 13a Fuse Instead Of A 3a?

What is the difference between a 3 and 13 amp fuse?

There are two main types of plug fuse: the 3A fuse and the 13A fuse.

In simple terms, a 3A fuse should be used for appliances rated at 700W or less, and a 13A fuse for appliances rated over 700W.

If an appliance using a 13A fuse is found, extra caution is needed.

Technically, this is the ‘least safe’ fuse..

What is a 3a fuse used for?

Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

Can I replace a fuse with a higher amp?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I use a 2 amp fuse instead of 1 amp?

The real answer is NO. The manufacture put a 1 amp fuse in the unit because the typical draw is much less than the 1 amp and the fuse blow will be an indication of trouble coming.

Can I use a 3 amp fuse instead of a 2 amp?

Yup. The fuse is there to protect the wiring and 3 amp is well within the supply wire’s capability. Re: Radio calls for a 2.5 amp fuse.

What amp fuse do I need for LED lights?

75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

What do you use a 5 amp fuse for?

Some circuits in older houses might contain Fuse Wire instead of Fuses. If this is the case in your house, you should use 5 amp wire for a lighting circuit, 15 amp for an immersion heater circuit, 30 amp wire for a ring main or cooker circuit (for cookers up to 12 kw).

Do I need an inline fuse for LED lights?

These LED lights draw less amps than your standard incandescent lights. You should not need a circuit breaker of in line fuse. … However, you can install an inline fuse if you feel that you need one.

How do I know what amp fuse to use?

You’ll usually find the fuse rating on the side of your fuse, which will be given in amps. Fuse rating is the amount of current needed for the fuse to blow or break. When this happens, it stops the electrical power from flowing through the electrical circuit.

What happens if you use the wrong fuse in a plug?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can you put a 3 amp fuse in a 13amp fused switch?

You have to buy a 13A fused spur and change the fuse with a 3A one.

Can I replace a 13a fuse with a 5a fuse?

not it’s not. the device can’t take more than 5A that’s why it has a 5A fuse. if you put a 13A fuse in the device might take upto 13A before the fuse blows and more than likely you’ll fry it.

Can I put a 3 amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

Can I use a 5 amp instead of a 3 amp?

If you replace it with a 5A fuse you will lose part of the protection the 3A fuse was intended to provide. In case of a failure of the device the fuse is suppose to protect, the result of using a larger fuse could be to damage the device to the extent that it could not be repaired. It could also start a fire.

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

How many watts can a 5 amp fuse take?

Fuse ratings45 AMPFor circuits of more than 13kw (13000 w)13 AMPFor appliances between 700 and 3000w (3kw)5 AMPFor lighting circuits. The maximum permissible load of a lighting circuit is 1200w or 12* 100 watt lamps3 AMPFor appliances up to 700 watts, such as table lamps and alarm clocks3 more rows

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

How do you size a 12v fuse?

Find the size of fuse by multiplying the amps required by the device (2) by 1.5. 2×1.25 = 2.5 then we will round up to the nearest fuse size (in multiples of 5 amps) which would call for a 5 amp fuse.

Can I use a 10 amp fuse instead of a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

Can I put a 5amp fuse in a lamp?

No, it’s quite safe. I think I’ve seen lamps with 13 amp fuses anyway. If there’s a short-circuit it’ll be more than 5 amps, or 13.